Vac Bed Update

 Default  1 Response »
Aug 102011
 

As hinted at in the post about Heros this month, I think I’ve come up with some of the solutions to the problems and issues we’ve been having with the Vac Bed since we bought it. There was a combination of issues, but all of them have been really easy to solve.

The first issue was that on initially using the bed, the Latex covering didn’t seem very taught. This was solved by buying some more of the plastic pipe used for the frame from a local DIY store, and cutting it to be slightly longer than the original. This means that the Latex now starts taught across the frame, and helps to improve the suction. The other issue we solved with the frame was that the holes seem to get covered up by the Latex when it’s sucking – to this end, I’ve drilled extra holes in the frame to improve the suction. We also solved an issue with a whistling noise by turning the connector the Vacuum Cleaner goes in to around.

The final problem wasn’t really a problem, but I often found it uncomfortable to breath through the breathing tube gag due to the sheer length of the breathing tube, so we solved that by cutting it in half, meaning there’s less than half the distance to breath and it was easier and more fun.

As hinted at in my ZentaiSpot Twitter Feed, my owner and I ended up with the house to ourselves, which we were told would last until tomorrow. Once my owner had finished his work, we set about having some fun and testing the improvements to the Vac Bed. This initially proved to be a major success, as the following picture shows.

However, as the Vacuum Cleaner doesn’t really like running constantly, we had to give it a break – and my owner decided that I should be dressed up in my Latex Shorts + T-Shirt, in keeping with the theme of the day. I also ended up having my cuffs padlocked around my wrists and ankles, and then proceeded to do something very normal – sort out a load of things on the computer. I was then told that I had to stay like this while we drove up to the local takeaway for dinner, but my owner eventually relented and let me put combats on so as not to scare the neighbours!

After eating, we returned to the Vac Bed, where we also decided that we’d give it a clean using the Latex Cleaner from Latex 101 and see if that made any difference… and it certainly appeared to make a difference to the photographs at least! We ended up doing some different poses (as best I can when my head has to stay in one place!) and we think some of them came out quite well.

Unfortunately, such is life, playtime had to come to an abrupt end 🙁

Spot

Heros – August 2011

 Default  Comments Off on Heros – August 2011
Aug 092011
 

The first Sunday of the Month saw Spot heading out to Heros. We set off a little later than we intended to, mainly due to sorting a few things out and the fact that I’d been away for the previous week. We then ended up being even later still due to slow traffic on the road, and the Central Line being unusually slow. It was also unusually quiet on the train, which took us by surprise.

We arrived at the Backstreet and set about getting changed, and after paying our admission, went through and in to the club, which was also reasonably quiet. I did get a few strange looks when I walked in carrying a box of Bonios… which were actually genuinely Bonios! They taste a little like cardboard, combined with gravel, in case you were wondering. Although, having my latex paws on did mean that I couldn’t easily eat them as they were near the bottom of the box.

A little later, Heros started to fill up as more and more of our friends arrived – including Sam and Gizmo. I spent some time catching up with Gizmo after this trip to Edinburgh, and just generally chatting to him while having a relaxing drink… and some Bonios. Later on Scamp and Mark arrived, having been at a Pup Walk which I’d missed, mainly due to being a little tired from Scout Camp.

I can’t really remember much else that happened, other than spending some time on the floor playing with my chew toy … and at one point dragging Gizmo round the room. I also remember running off with the Chocolate Buttons at one point too, which was probably a little naughty!

As usual, Heros’ was a chance for me to just unwind and be pup-like in a relaxed atmosphere. However… this month the real fun was to come after Heros *wags tail*

It had been arranged with Sam and Gizmo that we’d head back to Sam’s afterwards so that they could experience the Vac Bed that we’ve recently purchased… this also gave me a chance to play with it again. This helped me realise that it would be helpful if the top and bottom poles for the bed were a little longer, after watching what it does when you use it in person rather than being the one in the bed.

We therefore set off for Sam’s, with Mike, Sam, Gizmo, Colin (My Owner) and I stopping for a quick bite to eat at McDonalds before we went off to Sam’s. On arrival, I started setting up the bed, and was nominated that it would be best if I was the first one in it… so I stripped naked, got in the bed, was zipped in and the hoover was switched on. The first vacuuming wasn’t the tightest that I’ve managed before in the past, but still really nice. It’s a strange feeling, as you become one with the latex sheets and, although the hover is running, it seems somewhat peaceful inside (even the hoover noise isn’t all that loud). You’re in the dark and unable to move (well, you can wiggle but not move your limbs) but it doesn’t seem oppressive. After a quick break to let the hoover cool down, I was re-vacuumed. This time the seal was somewhat better, and it felt like the latex was hugging you. It’s not cold, and nor is it warm … just as I said, oddly peaceful. The sensations when you are stroked from the outside are amazing, everything on your body seems to become super sensitive. Probably due to the sight, smell and hearing senses being unable to determine what was going on. After my couple of sessions, we moved on to Sam, Gizmo and Mike – and then I was allowed another opportunity to use it after the others.

We finally left Sam’s around 2.30AM which was a bit naughty considering most of us all had work the next day!

Since the night, and before the blog post, we’ve been out to buy new tubes to extends the top and bottom pipes… so I’m sure we’ll update the blog on progress next time we get a chance to play with it 🙂

This is looking like it could be a busy week for Spot, with the hope of getting to two club nights this week – so you can be assured that I’ll update the blog if that’s the case.

*wags*

Spot

Birthday’s and a Party

 Default  1 Response »
Jul 302011
 

It seems that a lot of my friends have birthday’s at this time of year… and that my owners forgetfulness even extends to Birthday Cards *paws over eyes* We’d bought all the birthday cards we needed, but they ended up sitting on my owners desk and we’d completely forgotten to post them off to various people!

One of our friends, Sam, organises a party every year for his birthday, and my owner and I were invited. After arranging cover at work, we set off for the night.

On arrival at the party, I set about setting up some funky lights for when it got dark and music was playing… this is much easier to do in ‘human’ form than it is in Spot mode as the latex paws make it incredibly difficult to use touchpads on laptops, as does the Zentai suit really. After that was done, I went to get changed with the help of my owner… I needed the help as I was being connected to the E-Stim remote box for the evening to keep me under control, so these need to be positioned appropriately. I then put the Zentai on, my paws and my harness and went through to relax.

As more people arrived, some food appeared and I was allowed to have some of it… with the proviso that it was eaten out of the doggy bowl. Sausage Rolls are OK doing that… but a whole chicken wing was actually quite difficult to eat as a dog would – i.e without being able to hold it. I eventually had to give in and ask my owner to hold it for me so I could eat all the chicken off it 🙁 Of course, after the Chicken etc. came the really awkward thing to eat out a dog bowl – a bowl of chilli… although this seems like it should be quite easy, it does start to make the nose tingle a little bit and seems to take a lot longer to eat than you would think.

Unfortunately, as I spent a lot of the time relaxed and in puppy mode, I don’t really remember much more of what happened in the evening, other than talking to Gizmo and playing fetch with him and his owner… OK as I’d been clipped together with him we didn’t really have much choice other than to play fetch together though! This involved running round the room chasing the new rubber (or was it leather) bone that he’d bought at Regulation during Fetish Week recently, and not tripping anyone else up… which I think we may have done … *wuffs*

The theme of eating out a doggy bowl continued as, just after midnight, Happy Birthday was played, the candles were blown out and we were all given a piece of chocolate cake. This was, of course, presented to me in my doggy bowl, from where I lapped it all up… then had my face cleaned as the chocolate had gone everywhere!

Eventually, about 2AM we all retired to ‘bed’ (or our space on the floor) and went to sleep until the next morning. When my owner presented me with a coffee, I sat up to drink it and it was pointed out to me that I’d spent all night sleeping on my chew ring and had a rather interesting pattern along the side of my face *oops* I hadn’t even noticed this, and obviously felt no discomfort from it – but I really did have some interesting markings down my cheek.

Unfortunately for me, it was agreed that Gizmo and his owner could get their own back on me using the E-Stim 2B box and some experimenting so I was duly unplugged from the remote version and plugged in to their 2B and teased and tormented with the functions on the box for about 30 minutes… OK, slightly less publicly than Gizmo was but still. Breakfast was then served… again, in my doggy bowl. Thankfully it gets cleaned out after each ‘course’ in it!

After breakfast, we had to leave as we had some domestic things we needed to do before we headed home so we started packing up and Spot had to get changed 🙁 Even though I have been known to do things in the Zentai normally, the particular task that we were doing would not have suited itself to the Zentai being on.

All in all a good and fun time was had *wags tail*

Speaking of Birthday’s my owner has made me take my birthday off work … but won’t tell me why *pouts* He won’t even give me any clues as to whether it’s domestic or kink related 🙁

BBB – Sunday 17th July 2011

 Default  Comments Off on BBB – Sunday 17th July 2011
Jul 212011
 

Following the trip to Regulation on Saturday, Spot went on another shopping trip – this time to the BBB in Birmingham.

We set off and arrived at Birmingham, in the rain – and wandered to get some cash out the cash machine before heading down to the club where the BBB is held. On arrival at the club, we paid our admission fee, bought tickets to the After Party and headed off so that I could get changed. After putting the E-Stim pads on, it was time to pull the Zentai on, put the harness on and the paws.

As I left the toilets, we worked out what to do and realised that it had just gone 1.30pm so decided that it was probably best to head up to the top floor for the demo. This month, the demo was on Mummification, and the person doing the demo had 3 subjects… and then three more from the crowd. The first subject was a ‘mummified pup’ who’d been wrapped up in pallet wrap, and was wandering around the floor. He then demonstrated the use of bondage tape on a willing ‘victim’ from the audience, before starting to pallet wrap his main participant. Part way through this, a mummy in a coffin made an appearance (and from the looks of it, scared Keith with the surprise ‘entrance’), demonstrating mummification in bandage. During the demo, he also demonstrated hanging someone with pallet wrap, and how to breath through pallet wrap. The demo was actually quiet interesting, and worth attending.

After the demo, we wandered down the stairs to speak to the people from the E-Stim stand, and purchase the two remotes we’d asked them to bring for us since my owner keeps losing them. After a quick chat, we then decided we’d go and have some food… braving the cafe inside the club. Thankfully, they seem to have improved, and taken on some feedback from us, and probably others, on their service so this was much more professional.

After food, we set off for a wander around the event and stopped at the Latex 101 stand, to discuss the suit they’re making for us… and ask for tips on cleaning White Latex. They usefully did a quick demonstration for me of a product they were selling… and promptly sold a bottle so that pup’s paws can be kept clean *wags tail* They also gave us some advice on storing our new vac bed between sessions. We didn’t actually see anything else that we wanted to buy downstairs, so after a quick drink we went back upstairs for a wander round these stalls.

We found that Fetters, where my ankle suspension cuffs came from, had a stall at the fayre, so we stopped and had a look. I tried on wrist suspension cuffs, and found they fitted but we decided not to buy them straight away. We did, however, end up buying a new electrode for our E-Stim kit – an Electro Whisker.

As it reached the end of the day, we headed up the stairs to the After Party, and after my owner got changed, we sat down and had a quick drink. My owner started scratching my head and I lay down and managed to fall asleep – oops! When I woke up, I had a bottle of coke, and managed to fall asleep again – *paws over eyes*! This time though, we decided we’d head off after that for safety sake. So although we attended the after party, we didn’t actually get any chance to play with the things *whimper*. The one thing I had hoped to be there, which is the electric winches which are often there, weren’t so I was slightly disappointed on that, as I’d brought the suspension bar and suspension ankle cuffs to the After Party to have a play with.

It ended up being quite a fun day, with lots of time for Spot- so in the end I was a happy pup! … This didn’t finish there though, since I’d travelled home in the Zentai. When home I was pawed up with the lockable leather paws rather than my latex ones, and put to bed in my cage.

This is where the E-Stim 2B box had an outing for the day!!! … With the pads still stuck to me from earlier, the remote box was detached and the 2B connected… Over the space of about an hour and a half I managed to get to a long way up the power scale, though the contractions in the muscles were powerful enough to start to bend my cage … NOT an experience to be repeated any time soon. I think this was more a bit of luck with where the pads were located and the mindset I was in … the location for the pads is not something that is easily re-creatable, so every experience with E-Stim is different for that and how the body reacts to the Electro play is never going to be the same from day to day … My backside is still very ‘tender’ from it 🙁

New Toy – Vac Rack Vac Bed

 Default  Comments Off on New Toy – Vac Rack Vac Bed
Jul 172011
 

This post could have been started on Wednesday as that’s when my owner and I started the ball rolling on our newest purchase. As the subject line says, we’ve bought ourselves a VacRac from Regulation in Islington, taking advantage of their 20% discount for “Fetish Week”.

We’ve gone for a Black Extra Large VacRac and we decided we would order it in advance, as they’d said they didn’t have any in stock but could make it in time for us picking it up today.

We set off this morning to go and pick it up, and meet up with Gizmo and his partner at the shop… we ended up being there for 3 hours! When we turned up, we were offered a drink and had a chat with Gizmo, his partner Max and Adam who was working for the shop. We also discovered that there was going to be an Electo Stim demonstration, so we thought we’d have a look at that as well.

As I’m fairly experienced in E-Stim, it seemed that Gizmo was unanimously decided (or was that nudged to be a ‘willing volunteer’???) as being the guinea pig for the demonstration, although we were helping by answering questions that were being asked of us and explaining a few things when the demonstrator went to fix his power supply for the 2B box he was using – take note … we were selling it for you *wags*.

After the demonstration, we had a quick walk around the shop and ended up spending a bit more on a couple of other new toys – a spreader bar which is also suitable for suspension (the same as the ones I’ve been hung on at a Dungeon) was the main one!

We then left to go and on the walk back to the tube station we bumped into Scamp and his partner… a very quick chat with them as they were of to Regulation too. We then said our farewells and off to have some dinner and play with the Vac Rac – and I have to say the experience was fantastic! I thoroughly enjoyed the feelings although we still need to work out a couple of logistical issues with it – like how not to cook the hoover.

Tomorrow, Spot is off to the BBB for a day out, so hopefully that will be enjoyable.

*woofs*

Spot

 Older Entries  Newer Entries